How Long to Charge an Electric Skateboard (13S1P)?
Charging an Electric Skateboard (13S1P) from empty to full takes about 2 h 12 min with its standard 250W charger. The battery holds roughly 390 Wh, and this page estimates the time for every common charger wattage, using the Lithium-ion (Li-ion / Li-Po) chemistry it actually uses.
Charge time calculator for Electric Skateboard (13S1P)
Estimated charge time
2 h 12 min
Includes the slower li-ion taper phase above 80%.
Charge time by charger wattage
| Charger | Power | Full charge (0-100%) |
|---|---|---|
| Slow charger | 75W | 7 h 20 min |
| Standard charger | 250W | 2 h 12 min |
| Fast charger | 450W | 1 h 13 min |
Battery capacity: 390 Wh · Chemistry: li-ion
The 13S1P configuration of this electric skateboard delivers the high voltage necessary for responsive acceleration and sustained top-speed cruising, but its single-cell parallel structure means each cell bears the full charge current directly. This architecture demands a disciplined charging regimen to preserve lithium-ion longevity; casual top-ups between rides are far preferable to repeatedly draining the pack to critically low levels before recharging. Riders who establish a habit of charging soon after use—rather than waiting for the battery warning light—consistently report extended pack lifespan and more predictable performance in the field.
For a lightweight board designed to slip into commute bags and navigate urban terrain, the compact 13S1P battery is a trade-off between portability and endurance per charge cycle. Lithium-ion chemistry thrives in moderate conditions, so storing your skateboard in a cool, dry environment (avoiding direct sunlight and temperature extremes) between riding sessions will slow degradation far more effectively than any charging trick. When you're not riding for an extended period, leave the pack at a partial state rather than fully charged or fully depleted—this simple practice removes stress from the cell chemistry and helps ensure your next session feels as lively as the last.
With the fastest charger listed here (Fast charger, 450W) it takes about 1 h 13 min. With the slowest (Slow charger, 75W) it takes about 7 h 20 min. This lightweight electric skateboard uses a 13-cell series, single-cell parallel configuration for high voltage and nimble handling.
Frequently asked questions
- How long does it take to charge an Electric Skateboard (13S1P)?
- From 0% to 100% with the standard 250W charger, it takes about 2 h 12 min. Using a faster charger shortens that; using a weaker one extends it, see the table above for exact numbers.
- Why does my electric skateboard feel less responsive after a few months of regular use, even though the battery still accepts a charge?
- Lithium-ion cells gradually lose their ability to deliver peak current density as they age—a natural process accelerated by deep discharges, heat exposure, and storage in fully charged states. The 13S1P design concentrates current through single parallel paths, so subtle capacity fade in any individual cell can noticeably reduce the board's punchiness during hard acceleration. Adopting moderate charging habits and avoiding extreme temperatures will slow this inevitable drift, but some performance softening is normal across hundreds of charge cycles.
- Is it safe to charge my electric skateboard indoors or near flammable materials?
- Lithium-ion batteries are generally safe when charged with a quality charger matched to your board's specification, but they do generate heat during the charging process. Allow adequate ventilation and keep the board away from bedding, curtains, and other flammables while charging. If you ever notice the battery becoming excessively warm, the charger behaving unusually, or any visible cell swelling, stop immediately and allow the pack to cool in a safe location; these can be early signs of a cell fault that warrants inspection before further use.
- How is this charge time calculated?
- We divide the energy needed (390 Wh times the percentage you're charging) by the charger's effective power, which is the charger's wattage times the battery chemistry's real-world charging efficiency (85% for Lithium-ion (Li-ion / Li-Po)). The same formula powers both this page and our API.
ChargeTimeCalculatorestimates are based on typical charger efficiency and battery chemistry, not a live connection to your device. Always follow your manufacturer's charging guidance.