How Long to Charge an Electric Skateboard (11S2P)?
Charging an Electric Skateboard (11S2P) from empty to full takes about 2 h 40 min with its standard 350W charger. The battery holds roughly 660 Wh, and this page estimates the time for every common charger wattage, using the Lithium-ion (Li-ion / Li-Po) chemistry it actually uses.
Charge time calculator for Electric Skateboard (11S2P)
Estimated charge time
2 h 40 min
Includes the slower li-ion taper phase above 80%.
Charge time by charger wattage
| Charger | Power | Full charge (0-100%) |
|---|---|---|
| Slow charger | 100W | 9 h 19 min |
| Standard charger | 350W | 2 h 40 min |
| Fast charger | 600W | 1 h 33 min |
| Ultra-fast charger | 850W | 1 h 6 min |
Battery capacity: 660 Wh · Chemistry: li-ion
The 11S2P lithium battery configuration in this electric skateboard represents a carefully engineered balance between sustained power delivery and extended riding sessions. The series-parallel arrangement ensures that you maintain robust acceleration and hill-climbing capability while the dual-cell parallel design distributes current demands evenly, promoting more consistent voltage output throughout your ride. Unlike single-string battery packs, this configuration naturally resists voltage sag during aggressive acceleration, meaning you'll experience reliable torque whether you're launching from a standstill or maintaining speed up inclines. Charging this multi-cell architecture benefits from patience—allowing the battery management system time to balance cells across the pack ensures longevity and prevents premature capacity fade that can result from rushed top-ups.
For day-to-day ownership of an 11S2P electric skateboard, adopting mindful charging habits will substantially extend your battery's lifespan beyond casual expectations. Avoid the temptation to drain the pack completely before recharging; instead, think of it as a device you'll charge frequently, similar to how you'd maintain a smartphone or laptop. Environmental temperature matters significantly with lithium chemistry—charging in moderate conditions, away from extreme heat or cold, allows the cells to accept energy more efficiently and safely. If you plan an extended break from riding, store the battery at a moderate state of charge in a cool, dry location rather than topped-off or completely depleted. The intelligent battery management system in your skateboard actively monitors cell balance during charging, so uninterrupted charging sessions (without unplugging mid-cycle) help the pack maintain internal equilibrium and peak performance over seasons of use.
With the fastest charger listed here (Ultra-fast charger, 850W) it takes about 1 h 6 min. With the slowest (Slow charger, 100W) it takes about 9 h 19 min. This high-performance electric skateboard uses an 11-cell series, 2-cell parallel lithium battery configuration for increased power output and range.
Frequently asked questions
- How long does it take to charge an Electric Skateboard (11S2P)?
- From 0% to 100% with the standard 350W charger, it takes about 2 h 40 min. Using a faster charger shortens that; using a weaker one extends it, see the table above for exact numbers.
- Why does my 11S2P skateboard sometimes feel less responsive after a few months of regular charging?
- Lithium battery packs gradually lose their peak power delivery over time as cells age, and this is especially noticeable in high-performance applications like electric skateboards. The parallel-cell design of your 11S2P pack works hardest during acceleration and climbing, so aging appears first in those demanding moments. Maintaining proper charging habits—avoiding deep discharges, storing at moderate charge levels, and keeping the battery cool during and between sessions—slows this natural process significantly. If you've been charging aggressively or in warm environments, the internal cell balance may also drift, reducing your effective power until the next balanced charge cycle.
- Is it safe to charge my Electric Skateboard (11S2P) indoors, or should I charge it outside?
- Lithium batteries are inherently safe when managed by a quality charging system, and indoor charging is perfectly acceptable for your 11S2P skateboard provided you follow basic precautions. Keep the skateboard on a non-flammable surface away from bedding, curtains, or other soft furnishings during charging. Ensure good air circulation around the pack—a garage, room corner, or ventilated space is ideal. Avoid charging on extremely hot days or in direct sunlight, as elevated temperatures stress the lithium cells and increase internal resistance. A climate-controlled indoor environment actually offers advantages: it protects both the skateboard and battery from moisture and extreme temperature swings that outdoor storage invites. Always use the charger provided by the manufacturer, as it's calibrated specifically for your 11S2P architecture.
- How is this charge time calculated?
- We divide the energy needed (660 Wh times the percentage you're charging) by the charger's effective power, which is the charger's wattage times the battery chemistry's real-world charging efficiency (85% for Lithium-ion (Li-ion / Li-Po)). The same formula powers both this page and our API.
ChargeTimeCalculatorestimates are based on typical charger efficiency and battery chemistry, not a live connection to your device. Always follow your manufacturer's charging guidance.